All TPS containers are fully integral so that there can be no loss of parts as they move through the supply chain.
|
 |
The TPS TILTER is designed for the discharge of viscous products, the container is loaded to the platform and with the use of the over centre cam system the container can be tilted by just pulling the handle even when the container is full of product.
 |
|
 |
The Ratchet Wringer has been designed to help with the discharge of all liquid products with simple and easy operation just connect the liner when full and as the container empties wind the handle to keep the bag taught thus allowing all of the product to move towards the discharge outlet for total emptying of the container. |
|
 |
The Ratchet Wringer has been designed to help with the discharge of all liquid products. With simple and easy operation just connect the liner when full and as the container empties wind the handle to keep the bag taught thus allowing all of the product to move towards the discharge outlet for total emptying of the container. |
| |
|
 |
Designed to work with the TPS Autofill liner. Simply fit the fill flange of the liner into the neck of the bridge and connect your pipe work the liner will fill automatically with no operator involvement. The bridge can also be used for discharging the container from the top. |
| |
|
 |
Designed to hold the liner during discharge of the
liner to help stop the liner collapsing with the product can also be used for the filling procedure if required.
|
| |
|
 |
Designed to hold a top discharge pump for top
extraction where the pump need to be suspended above the container |
| |
|
|
